Last Modified on Jan 6, 2023

Top 8 Best Table Saw For Beginners - Top Picks & Buying Guide

S ometimes, everyone needs a saw, and I think you too may have needed it at some time, and if you are a carpenter and have a shop, you know this thing better than me. There are many ways to cut the wood like we can cut it by using a simple hand saw or using a jigsaw or circular saw, and either we can cut it with a table saw.

But all these tools have their own advantages and disadvantages. Otherwise, there is no need to make so many tools just to cut the wood. There are many other kinds of wood cutting devices in the market, but there is no use of talking about them and make this article too long because today we are discussing about table saws only.

So if you want to buy the best table saw for beginners, keep reading because in this article we have talked everything about that with their pros, cons and features.

After reading this, you will become your own table saw expert, and you will not need any advice to buy a table saw in the future.

best table saw for beginners

A table saw, also known as bench saw or sawbench, is a stationary device that helps to make an accurate and perfect cut in any kind of wood or any wooden pieces according to the user. It is an essential tool that a woodworker thinks about buying.

By the way, there are many types of table saws such as contractor, Jobsite, Cabinet, Hybrid, Benchtop, and compact table saw. Because of these different types, sometimes the buyer suffers many problems while buying a perfect one for him.

So if you are also one of those people and are looking for a table saw then you have landed on the right place because, in this article, we have discussed about the top 8 best table saw for beginners, which will definitely make your table saw buying decision more easier.

1. DEWALT DWE7491RS 10-Inch Table Saw

Description

DeWalt is a reputed brand which is very famous in the field of hand and power tools. You'll find this DeWalt product in almost every table saw the list and also on the top. Its reason to be on top is its strong and powerful performance. This portable device comes with a rolling stand, which you can set anywhere in a few seconds, and you can keep it at your own when the work is finished, it will not take much space.

It is very sturdy, and its built quality is awesome. One disadvantage of this product is that it is attached with the screws and bolts to its stand, due to which if you ever need to separate it from the stand, you may face a lot of difficulties. In this, you get three positions to set the fence. The best thing about this fence is that in this you get a built-in swinging arm which folds back and forth. So when you swing it forward, it comes little bit closure to the blade, due to which you can cut thin cuts very comfortably.

In this model, you get a larger rip capacity than any other table saw. Where mostly saw offers a rip capacity of up to 24 inches, this tables saw comes with a 32 and a half inches of rip capacity. So if you are looking for the largest rip capacity table saw, then you will not get a better option then this.

Key Features

  • 32.5 inches rip capacity
  • Rack & pinion telescoping fence system
  • Speed of 4800 rpm
  • 15 amp Motor
  • 3 years warranty

Pros

  • Largest rip capacity
  • Cuts hardest wood easily
  • Highly durable and sturdy
  • Rolling stand designed for easy set up

Cons

  • Slightly heavy
  • Low quality miter gauge

2. Bosch 4100-09 10-Inch Worksite Table Saw

Description

This product from Bosch can compete with any other portable table saw. It comes with a mobile base, you will not have any problem with moving it. One good thing about this saw is that the slots have been made to keep all the parts attached to it, which you do not see much in the table saws. So after the work is complete, you can attach its fence, miter gauge, and the rest of the parts on it, and they will be more secure.

In this, you get to see the rip capacity of 25 inches, which is quite decent. It cuts the wood like butter and gives accurate cuts. The instructions are too easy so that a newbie can also install it by simply reading them once. It is a little heavy, so if you ever need to load it in a truck, then if you keep two people together, it will be better.

One thing that is disappointing about this is the quality of its rep fence. You'll need to apply to more force to push the fence as it does not glides. You also get a blade guard, which is very easy to remove and apply, as it seems that the company has taken great care of safety. Overall this is a good table saw in this price segment.

Key Features

  • 25 inches rip capacity
  • Smart Guard System
  • Speed of 3650 rpm
  • 15 amp Motor
  • 1 year warranty (30 day money back guarantee)

Pros

  • Anti kickback pawls for protection
  • Weather resistant
  • Cuts hardest wood easily
  • Designed for durability and longevity
  • Rolling stand designed

Cons

  • Average fence quality
  • Bulky and heavy

3. SKILSAW SPT99T-01 Portable Worm Drive Table Saw

Description

This is a Portable Worm Drive Table Saw from SKILLSAW. Basically, this thing is a beast. It will do everything you needed to do. It comes with a 25 inches rip capacity. The quality of the rip fence is also very good, and it is also very easy to install. In this, a separate space has been created for the rip fence, so if you are not using it, then you can keep it in it.

A good quality blade guard is also given with this table saw which is very simple to install. Whenever you are working on any table saw, you should first set the guard, which reduces the risk of kickback so that if something wrong happened, this would protect your fingers.

Its weight is 49 pounds which is much less than its other saws which is a good thing that you will not have any problem when you place it on a flat surface. It is extremely lightweight, compact, and as it is named, It is portable also. So, If you need to load it in a truck, then you will be able to do that comfortably. It is important to keep in mind that you do not get any stand with it, so if you need it, you will have to buy it separately.

In many table saws, you will notice that their quality is quite good, but the quality of their blade is cheap. But this is not the in the case of this product. The company works very neatly on its accessories.

Key Features

  • 25 inches rip capacity
  • 2-5/8 inch depth of cut
  • Rubber plastic push stick included
  • Offers maximum torque to rip applications
  • 1 year warranty

Pros

  • Metal construction makes it highly durable
  • Easy to install
  • Gives the smooth and accurate cuts
  • Lightweight and compact

Cons

  • Doesn't come with stand
  • Low quality miter gauge

4. Grizzly Industrial G1023RL Cabinet Table Saw

Description

This is a cabinet table saw which comes from the brand Grizzly. Grizzly products are a bit expensive, but they can be trusted. This is one of the most popular and best-selling items in the field of table saws. The green and black color combination gives this tool a classy look and make it quite attractive.

What I really liked about grizzly stuff was that they seemed to have high accountability for what they're giving out to the customers. That comes from just very good transparency in the shipping process like when's your package coming, what to expect, what not to expect like is the going to roll it into your garage.

Even the manual is very well written by somebody who actually cares about woodworking and not by just some technical writer in a basement that they threw down there.

So overall the good about the table saw it's dead flat on the cast iron top that makes it really easy to get straight cuts through pretty much everything without any fuss. This extremely powerful is recommended for professionals. It is a little expensive, but it is a value for money product.

Key Features

  • Speed of 3450 rpm
  • Table size: 40 X 27 inches
  • Rip capacity of 32 inches
  • Contains t-slots for miter gauge
  • Shop Fox Classic Fence

Pros

  • Heavy duty product
  • Solid cast iron table
  • Quick-Release Blade Guard
  • Value for money product

Cons

  • Very heavy
  • A bit pricy
  • Poor dust collection

5. DEWALT DWE7485 Table Saw for Jobsite 8-1/4-Inch

Description

This is another table saw from DEWALT for beginners and DIYers. In this, you will get 24.5 inches of rip capacity to the right side of the saw and about 12 inches to the left side of the saw. If you want to cut plywood of 4 x 8, then there will be no problem. It has on-board storage for miter gauge, blade guard assembly, anti-kickback pawls, blade change wrenches, non-through cut riving knife, and push stick.

Its powerful 15 Amp and 5400 rpm motor allow the user to cut anything they want. Like other DeWalt table saw, it also comes with the rack and pinion fence system, which helps the user in fast, smooth, and accurate adjustments and saves time. One of the good things about this table saw is that it has got a safety feature on its starting button, so when it is not in working position, and you don't want kids to touch it, you can cover the on/off button.

When it comes to cutting, let me tell you that it is one of the smoothest cutting devices. In fact, it cuts very smoothly from its upgraded version. If I tell you about its blade depth adjustments, it is quick and pretty simple to do. Many saws take time to get adjusted while this gives you the plus point in this factor.

Key Features

  • Speed of 5800 rpm
  • Dimensions: 26.65 x 14.08 x 27.15 inches
  • 24.5 inches rip capacity
  • 3-year warranty

Pros

  • Light weight and easy to carry
  • Comes with all accessories required
  • Recommended by experts
  • Metal roll cage for durability

Cons

  • Doesn't comes with stand
  • A bit noisy

6. Makita 2705 10-Inch Contractor Table Saw

Description

The next one on our list is Makita 2705 10 inch table saw. Makita 2705 is actually a contractor able saw that is also quite portable. Of course, being a contractor table saw, it is a much larger wingspan. This model allows you to work with stock as bit as 96 x 48 inches, which is very impressive.

Additionally, the miter motor power is still rated at 15 and from the speed at 4800 revolutions per minute. One feature that we like is the inclusion of an electric brake that immediately holds the blades. This allows you to gain time when cutting and removing your cut from the table.

A large wingspan allows you to work with large sheets of stock. Electric brake helps you gain productivity on the job also works like a security feature. It is quite heavier than other portable models, more expensive and not delivered with a stand.

If you need a job side table sorted carried back and forth, this is not the ideal model since it is slightly on the heavy side at 65 points five pounds. However, if you need a portable table saw with a wide tabletop and work mostly with white sheets of stock, you absolutely need to get this model. It is the best portable table saw in terms of stock capacity.

Key Features

  • No Load Speed of 4,800 RPM
  • 25 inches rip capacity
  • 1 year warranty
  • Aluminum die cast
  • Cutting capacity: 3-9/16" at 90° and 2-1/2" at 45°

Pros

  • Easy tools installation and removal
  • Large on/off switch
  • Electric brake for maximum productivity
  • Easy to read scale for faster adjustments

Cons

  • Fence quality could have been better

7. Delta 36-6023 10 Inch Table Saw with 32.5 Inch Rip Capacity

Description

This is a 10-inch size table saw that comes from the brand Delta. Delta is a brand that is not known because of the table saw, but its product is quite good in terms of quality. One noticeable thing about this brand is that the prices of its products are about half of the prices of other companies' products.

This table looks pretty good when it comes to the look and takes little time to be assembled, but the instructions are very good, so that a starter can also install it by only reading them once. The stand, which is not seen in a very compact saw, is also well designed and keeps the saw very well when used and folds comfortably when not in use.

It includes an innovative well-designed fence system, a miter gauge, good safety features, good mechanics for tilt and lift, and a powerful motor.

If you are concerned about its table cutting ability, let me tell you it cuts pretty nicely and gives the accurate cuts. If you are a starter and do woodworking like a hobby and need a table saw that is affordable and cuts well, you can go with it. It gives tough competition to the overpriced branded saws in the market.

Key Features

  • 32. 5 Inch Rip Capacity
  • Rack and pinion fence rail system
  • 2 ½ inches dust port allows for vacuum hook up
  • Speed: 5000 RPM
  • 77 pounds of weight
  • 5-Year Warranty

Pros

  • Good for a starter
  • Easily handles treated lumber and hardwoods
  • “One-Step” folding stand for easy transportation
  • Fence and guard storage on sides of saw

Cons

  • Not for heavy duty work

8. SAWSTOP 10-Inch Jobsite Table Saw

Description

On the last number on our list is a SAWSTOP 10 inches Jobsite saw that comes with the mobile cart assembly. It comes with a rip capacity of about 25 inches, which is quite decent for working on larger-sized woods. Its blade, which stops in 5 milliseconds, has saved many workers from cutting their fingers.

Its fence quality way better than the fences of most famous brands, and it comes with the extra small piece, which is to be put in front of the fence while cutting the very tiny cuts. Many saws can attach their parts to them, which sometimes causes those parts to fall, and some problems occur in them, but a separate chamber has been made to keep the parts in it, which keeps its parts even more secure.

There is no need to fill the air in its large solid wheel, which balances the table quite well. One of the best things about this tool that I like the most, and I am sure you'll like that its blade can go from zero to its maximum height by rotating the lever a single time.

Key Features

  • 25 inches rip capacity
  • blade stops in less than 5 milliseconds
  • No Load RPM 4000
  • High-Low T-Style Fence

Pros

  • Safest table saw
  • Onboard Storage
  • Active Dust Collection Guard
  • Best quality rip fence

Cons

  • Low quality miter guage
  • Difficult to cut a dado to a precise depth

Components to keep in mind while choosing a Table Saw


Table Top

A table top is the part of the table saw above which all the wood cutting work is done. The table top usually comes in sections. The entire section attaches to the center section, which covers the blade.

There are also slots for miter gauges on both sides of the center section, used to guide the wood. Generally, these table tops are made of cast iron, but most companies use low-quality steel to make it because of which the table quality and price both get cheap.

The table top needs to be smooth and perfect flat for the wood to be cut properly. Otherwise, the chances of getting an error in cutting get much increased.


Throat Blade

The throat plate is the part of the table saw covering the cutting blade, and we can get the blade's access by simply removing it gently. This throat plate has a cut from which the blade of our table saw goes up and down.

The gap between the blade and the throat plate must be as much as possible because sometimes the wood does not cut properly due to which it can get stuck in the gap and can also kick back, Which is not safe for any woodworker.

The throat plate is very thin due to which it sometimes breaks, but it is a common problem, and you do not have to be afraid of it. You can either buy a rigid throat plate or make a custom throat plate to fix this.


Blade

As we all know that the most crucial part of any cutting device is a blade. It is very important to sharpen the blade to get an accurate cut. You can set the height of this blade according to your wood.

To set it, a handwheel is given below the table top. If you turn it clockwise, the blade will come up, and if you turn it counterclockwise, the blade will go down. There is also an option to tilt this blade in many table saws.


Motor

Table saw motors are of 2 types. One of them is a direct drive, and the other is a belt drive. Both these motors have their own advantages and disadvantages.


Direct Drive

A direct motor is the one where the motor is directly connected to the blade and rotates it. Because of this direct blade's connection, the motor rotates the blade directly due to which less energy gets wasted and works very efficiently. These motor belts are much smaller and lighter than belt drive motors.

These are mostly used in small and portable table saws. It is much cheaper and quieter than a belt-drive motor and does not produce any vibration. The maintenance price of the table saw is also very low as compared to the belt drive motor.


Belt Drive

The blade in the belt drive motor attaches to a belt and rotates with its help, and due to this system, a little energy of the motor is lost. These motors are larger in size than a direct drive motor and are also much more massive than them because of which they are used to make large and stationary table saws.

This motor produces more noise and vibration than the direct drive motors but surpasses them in terms of power. Due to their high power in these motors, kickback risk is also high, which can also harm you.


Base

The base is the part where the whole mass of the table saw concentrates. There are many types of bases of a table saw. They are made from fully enclosed to very open. Dust collection of any table saw shows how its base is. The more the base is enclosed, the better the dust collection will be.

Most of the bases are made so that the user can move them comfortably, or they are made foldable too so that after completion of the work, the user can keep them on one side if needed.


Fence

Many companies have started making the fence in the table saw, which is a very good thing. It is very important to have a fence in any table saw as it guides the wood and increases the user's safety. An essential feature of a fence is its secure locking system.

So when you lock it, it does not move from its place and gives an accurate and perfect cut. Before locking, it is very important to see whether the fence is parallel to the blade or if not, you may face trouble while making a straight cut.

You can set it according to the requirement of your wood. It has a scale below it, which shows that on what distance your blade is from the fence.


Miter gauge

Miter Gauge is an instrument used for cross-cutting and also guides the wood for cutting. As much as a rip fence is necessary for a table saw, a miter gauge is also essential. Its job is to push the wood to a specific angle while cutting. The process of cross-cutting is quite easy.

All you have to do is take the wood, put the miter gauge in the slot, put that piece of wood in front of the gauge, and just push it. This helps a lot in cutting your wood precisely and keeps you away from the risk of injury. Special slots are made to use the miter gauge on the table top, in which the miter gauge is set.


Conclusion

Here we have listed all the best quality table saw for beginners above. Now, it is up to you to choose one for you according to your budget and type of use. These table saws are very sturdy, stable, and very good in performance, and you can trust each brand listed above.

You can go either with a portable table saw or a static one, but I will suggest you to go with a portable table saw as they do not acquire more space, and they are perfect for beginners in many aspects to start their woodworking career and are highly recommended by experts.




YOU MIGHT ALSO LIKE